Connecting the battery and remote control to the solenoid is the next step of installing the Superwinch. We found a place to store the winch battery in the locker on the starboard forward end of the flybridge, then ran heavy battery cables inside the side wall of the flybridge to connect the battery to the solenoid.
Wiring the remote control to the solenoid required a little more effort. First we had to decide where to locate the plug-in for the remote so that the 10-foot cord will reach the places we want to be when we are using it. The best place seems to be near the base of the mast, close to where the dinghy is stored on the boat deck. However, we couldn’t find a convenient place where we could recess the plug-in connection. After many rejected ideas, we settled on buying a weather-tight electrical junction box that will be mounted near the stairs to the flybridge and painted white to match the cabin.
We had a dry day on Monday, so I was able to clean up the teak on the swim step and boarding ladder, using the same technique and product that I used on the teak decking a few days ago (see June 3 post). After some serious scrubbing, the dirty teak cleaned up pretty good and it was so nice to see the warm teak color return.